MaxwellTDOutput
MaxwellTDOutput
Section Time-Dependent::TD Output
Type flag
Default maxwell_energy
Defines what should be output during the time-dependent
Maxwell simulation. Many of the options can increase the computational
cost of the simulation, so only use the ones that you need. In
most cases the default value is enough, as it is adapted to the
details of the TD run.
WARNING: the calculation of the longitudinal or transverse E and B fields
can be very expensive, so please consider using the MaxwellOutput block
to calculate and output these quantities at certain timesteps.
Options:
- maxwell_total_e_field:
Output of the total (longitudinal plus transverse) electric field at
the points specified in the MaxwellFieldsCoordinate block
- maxwell_total_b_field:
Output of the total (longitudinal plus transverse) magnetic field at
the points specified in the MaxwellFieldsCoordinate block
- maxwell_longitudinal_e_field:
Output of the longitudinal electric field at the points
specified in the MaxwellFieldsCoordinate block (can slow down the run)
- maxwell_longitudinal_b_field:
Output of the longitudinal magnetic field at the points
specified in the MaxwellFieldsCoordinate block (can slow down the run)
- maxwell_transverse_e_field:
Output of the transverse electric field at the points
specified in the MaxwellFieldsCoordinate block (can slow down the run)
- maxwell_transverse_b_field:
Output of the transverse magnetic field at the points
specified in the MaxwellFieldsCoordinate block (can slow down the run)
- maxwell_energy:
Output of the electromagnetic field energy into the folder td.general/maxwell.
WARNING: the transverse and longitudinal energies will be correct only if you request
the longitudinal and transverse E or B fields as output. Otherwise they will be set to
zero.
- e_field_surface_x:
Output of the E field sliced along the plane x=0 for each field component
- e_field_surface_y:
Output of the E field sliced along the plane y=0 for each field component
- e_field_surface_z:
Output of the E field sliced along the plane z=0 for each field component
- b_field_surface_x:
Output of the B field sliced along the plane x=0 for each field component
- b_field_surface_y:
Output of the B field sliced along the plane y=0 for each field component
- b_field_surface_z:
Output of the B field sliced along the plane z=0 for each field component