Octopus on GPUs
Octopus supports using GPUs and this support has been substantially improved in the last years. It does not yet support all features, but for certain systems, using GPUs can be very efficient. In this tutorial, you will learn how to run Octopus on GPUs and also for which systems you can expect the best efficiency.
In general, the most-often used features should work on GPUs and should be efficient as well. If you run ground-state calculations, please use the RMMDIIS eigensolver. Time-dependent calculations are supported and are the most efficient (and also the most-used) run mode. Some features do not work when running on GPUs or are quite inefficient, e.g. spin-orbit coupling, DFT+U, hybrid functionals. Moreover, there can be an issue for periodic systems when spheres of pseudopotentials overlap with themselves due to the periodic boundary conditions.
It is really worth trying your production workloads on GPUs - for quite a lot of applications, it is more efficient than on CPUs and there will be more and more GPU resources available in the future.
If you find any issues with functionality or performance, please notify the developers.
The implementation is based on CUDA and targets only NVIDIA GPUs at the moment. As Octopus needs double-precision floating point operations, most consumer-grade and gaming GPUs will only deliver inferior performance because they focus on single-precision operations. The high-end HPC GPUs that are usually available in computing centers deliver much better double-precision performance.
When octopus is compiled with GPU support, it will detect if a GPU is available. If there are several GPUs per node, you should generally use one MPI process per GPU to be most efficient.
In general, systems need to be large enough in number of grid points and number of states to expose enough parallelism that the GPUs can exploit. If the system is too small, the overhead of launching computations on the GPUs and of copying data from and to the GPUs makes the computations less efficient than on CPUs. For large systems, the performance of running on GPUs can be much larger than the electricity consumption and the costs of the GPUs compared to CPUs.
Run a calculation on the GPU
For this tutorial, we will use the same input as in the previous tutorial. Save the following as inp file:
CalculationMode = gs FromScratch = yes XYZCoordinates = "1ala.xyz" Spacing = 0.2*angstrom Radius = 4.0*angstrom TDPropagator = aetrs TDMaxSteps = 20 TDTimeStep = 0.05
and the following as 1ala.xyz :
23 units: A N -1.801560 0.333315 -1.308298 C -1.692266 1.069227 0.012602 C -0.217974 1.151372 0.425809 O 0.256888 2.203152 0.823267 C -2.459655 0.319513 1.077471 H -1.269452 0.827043 -2.046396 H -1.440148 -0.634968 -1.234255 H -2.791116 0.267637 -1.602373 H -2.104621 2.114111 -0.129280 H -2.391340 0.844513 2.046396 H -2.090378 -0.708889 1.234538 H -3.530691 0.246022 0.830204 N 0.476130 -0.012872 0.356408 C 1.893957 -0.046600 0.735408 C 2.681281 0.990593 -0.107455 O 3.486946 1.702127 0.516523 O 2.498931 1.021922 -1.333241 C 2.474208 -1.425485 0.459844 H 0.072921 -0.880981 0.005916 H 1.975132 0.211691 1.824463 H 1.936591 -2.203152 1.019733 H 3.530691 -1.461320 0.761975 H 2.422706 -1.683153 -0.610313
Then, run the ground state calculation or reuse the ground state from the previous tutorial.
You can now run your first calculation using a GPU: change the run mode to td and use the batch script to run on one GPU as given at the end of this page. In the output, you will see the following section that shows some information on the GPU being used:
************************** GPU acceleration ************************** Rank 00000 uses device number 00000 Selected device: Framework : CUDA Device type : GPU Device vendor : NVIDIA Corporation Device name : Tesla V100-PCIE-32GB Cuda capabilities : 7.0 Driver version : 11000 Device memory : 32510.500 MiB Local/shared memory : 48.000 KiB Max. group/block size : 1024 **********************************************************************
The parallelization section shows that one process is used because we want one process per GPU. Because we use half a node, we can still use 20 OpenMP threads which can be beneficial especially in the initialization where still some computations are done on CPUs.
At the end of the run, there is an additional section on allocations and deallocations that shows how well the internal caching is used. Normally, you can ignore this section.
Now extract the timing of one timestep as we did in the previous tutorial. As a
reference, I have obtained 0.074s. To compare this using the same resources, but
no GPU, you can set the input variable DisableAccel
= yes and submit
the same batch script again. This time, it will only run on CPUs. For this, I
get a time of 0.26. We can compute a speed-up from these timings, which is 3.5;
for your runs it might deviate slightly.
This means that we get a speed-up factor of 3.5 when comparing half a GPU node on cobra with half a CPU node for this rather small system. This is already nice!
Beneficial use cases
TD calculations are most optimized for GPUs, other run modes less so. For GS runs, e.g., the orthogonalization and subspace diagonalization cannot make full use of GPUs yet, which leads to smaller benefits for GS runs on GPUs.
Moreover, grids need to be large enough to saturate the GPUs which are very powerful. Each process should have more than $10^5$ grid points.
NVIDIA GPUs are built such that 32 threads always execute the same instructions. Because of this, it is most efficient to run octopus in such a way that each process has a multiple of 32 states. The internal data structures of the code are designed to expose this parallelism in the threads to the GPU.
Parallelization in states (and k points) is more efficient than parallelization in domains. This is also the case for CPU runs, but the different is more pronounced on GPUs because the communication of the boundary points necessitates also transfers between the GPUs or between the GPU and the CPU. We use CUDA-aware MPI to enable direct data transfers between the GPUs, but this cannot completely compensate the overhead.
To examine how octopus runs using several GPUs, you can use the second jobscript at the end of the tutorial to submit a job to a full GPU node, using 2 MPI processes and 2 GPUs. The output section on GPUs will show:
************************** GPU acceleration ************************** Rank 00001 uses device number 00001 Rank 00000 uses device number 00000 Selected device: Framework : CUDA Device type : GPU Device vendor : NVIDIA Corporation Device name : Tesla V100-PCIE-32GB Cuda capabilities : 7.0 Driver version : 11000 Device memory : 32510.500 MiB Local/shared memory : 48.000 KiB Max. group/block size : 1024 **********************************************************************
which confirms that 2 GPUs are used. As you can see in the parallelization section, by default states parallelization is used, which results in 16 states per process.
Extract the timing from the output. I obtain 0.043s, corresponding to a speed-up of about 1.72 and a parallel efficiency of 86%. Although 16 states per process is not optimal, the parallel efficiency is still very good.
Now run the same calculation on 2 full nodes and determine the timing and compute the speed-up and parallel efficiency. What do you see? Is it still efficient?
Next, we will run the same calculation on one node, but using domain parallelization. For this, add ParStates = 1 to the input file and submit the jobscript again. Examine the parallelization section in the output to ensure that domain parallelization has been used. Extract the timing from the output and compute the speed-up and parallel efficiency. I obtain about 0.090s which gives a speed-up of 0.82 - the code becomes slower! This is due to the small grid in this system which does not expose enough parallelism to distribute it efficiently to two GPUs - the overhead of the parallelization scheme (e.g. communicating ghost points) is too large.
Domain parallelization for larger grids
Set the spacing to
0.15 and rerun the ground state calculation (you
need to delete the restart folder before). Then repeat the runs on one GPU and
on 2 GPUs using parallelization in domains. What do you observe? Is this
parallelization scheme more efficient for the larger grid?
Compiling Octopus for GPUs
If you compile octopus yourself, you need to specify the flag
--enable-cuda to enable CUDA support. If your CUDA installation is in a
non-standard path, you additionally need to specify
point to the corresponding CUDA installation directory. If you would like to do
profiling on GPUs using Nsight systems, it is advisable to add the flag
--enable-nvtx which will add
support for NVTX.
Using NVLink on Raven
If the domain parallelization on larger grids is not efficient on cobra, you can try to use a system that features a fast interconnect (e.g. NVLink), such as the raven supercomputer at MPCDF. If you have a normal account at MPCDF: run the same example on raven. The GPU nodes on raven have a fast interconnect on the board (NVLink) which can massively speed up domain parallelization runs which use CUDA-aware MPI. You need to load the modules “octopus-gpu/12” in order to use the octopus version specifically built to make use of CUDA-aware MPI. Run the example on 1, 2, and 4 GPUs with domain parallelization. What do you observe? Is it more efficient on raven?
To run octopus on the cobra supercomputer using one GPU, you can use the following script:
#!/bin/bash -l # Standard output and error: #SBATCH -o ./tjob.out.%j #SBATCH -e ./tjob.err.%j # Initial working directory: #SBATCH -D ./ # # Job Name: #SBATCH -J octopus_course # # Reservation: #SBATCH --reservation=mpsd_course # # Node feature: #SBATCH --constraint="gpu" # Specify type and number of GPUs to use: #SBATCH --gres=gpu:v100:1 - Use only 1 GPU of a shared node #SBATCH --mem=92500 - Memory is necessary if using only 1 GPU # # Number of nodes and MPI tasks per node: #SBATCH --nodes=1 #SBATCH --ntasks-per-node=1 # for OpenMP: #SBATCH --cpus-per-task=20 # #SBATCH --mail-type=none #SBATCH --email@example.com # # wall clock limit: #SBATCH --time=00:05:00 export OMP_NUM_THREADS=$SLURM_CPUS_PER_TASK # For pinning threads correctly: export OMP_PLACES=cores # Run the program: module purge module load octopus-gpu/12 srun octopus
It will run on a node with NVIDIA V100 GPUs and use 1 of them.
To run on a full cobra node with 2 GPUs, you can use the following script:
#!/bin/bash -l # Standard output and error: #SBATCH -o ./tjob.out.%j #SBATCH -e ./tjob.err.%j # Initial working directory: #SBATCH -D ./ # # Job Name: #SBATCH -J octopus_course # # Reservation: #SBATCH --reservation=mpsd_course # # Node feature: #SBATCH --constraint="gpu" # Specify type and number of GPUs to use: #SBATCH --gres=gpu:v100:2 - Use both GPUs of a node # # Number of nodes and MPI tasks per node: #SBATCH --nodes=1 #SBATCH --ntasks-per-node=2 # for OpenMP: #SBATCH --cpus-per-task=20 # #SBATCH --mail-type=none #SBATCH --firstname.lastname@example.org # # wall clock limit: #SBATCH --time=00:05:00 export OMP_NUM_THREADS=$SLURM_CPUS_PER_TASK # For pinning threads correctly: export OMP_PLACES=cores # Run the program: module purge module load octopus-gpu/12 srun octopus